INJORA 1.3" 68g/pcs Brass -3.75mm Offset Wheels for Micro Crawlers (W1301)
INJORA 68g 1.3" Brass Beadlock Wheel Rims for 1/24 1/18 RC Crawler Car (W1301)
Only Compatible with: INJORA 1.3" tires
Features:
- Made of brass, 68g per wheel
- Offer additional weight at the lowest point of your vehicle to help maximize stability
- Larger wheels give your vehicle a more aggressive stance and greater stage presence
- 1.3" wheel will set you ahead of the curve with performance and looks
Wheel Specifications:
- Part Number: W1301
- Material: Brass
- Outer Diameter: 33.5mm (1.32in)
- Width: 15.5mm (0.61in)
- Wheel Hub: 7mm (0.28in)
- Offset: -3.75mm
- Each Weight: 68g/pcs (2.40oz)
- Screws in each wheel: 6pcs M1.6*4.3mm
- Require tool: 1.5mm hex screw driver
Package List:
4 * INJORA 1.3" Wheels
AGE & RECOMMENDATION: Not for children under 14 years. This is not a toy.
Prop 65: ⚠️ California Residents Prop 65 WARNINGS: www.p65warnings.ca.gov
Returns & Refunds: Return options may vary by region. Please see our Return & Refund Policy for details.
Good looking wheels, add a good amount of weight and character.
Perfect for the red cat Apex
Beautiful wheels and heavy as!
I bought these to increase the front weight bias on my Arktos 6x6, and they have instantly increased the crawling performance by lifting the rears tyres off the floor when going up and over rocks. Great wheels!
I took a TRX4M and put the Injora IR40 body on it. The stock 1.0' size wheels did not look proportional. Using the brass 1.3' and Swamp claw 1.3 M/T Tires 70mm tall, it look great and will go so many more places. The Brass was needed for weight and worked well with stock motor and low range Injora gears.
it’s nice to be able to accessorize your favorite toys!
Awesome products will shop again
Some awesome heavy bead locks! Love them definitely the way to go to get some weight low.
Nice an heavy love them
Quality of the wheels are awesome. Will be buying again.
Nice and heavy, looks awesome and easy to mount tires
What kind of screwdriver or Allen key ist needed for the screws in the wheel ?
Screws in each wheel: 6pcs M1.6*4.3mm
Require tool: 1.5mm hex screw driver
Will these wheels work on the Redcat Apex 18 and the stock tires. Also I’m trying to keep the footprint as close to stock as possible.
Bonjour, Compatible avec la ref : YQW-1302 ? d'avance merci :)
Yes.
Is it possible to squeeze these in a 1.2 tire?
No.
Can we get a silver version?
Sorry, not at the moment.
Can i fit these with swamp claw 1.3 on the lc80 fcx18?
Will Injora 1.0 tyres fit on these rims? I'd like to fit them on my FCX24 UNIMOG
You will be able to stretch 1 inch tyres onto any 1.3 wheel as long as it is a bead lock wheel. Can be a bit fiddly but works well. I'd recommend using inserts in the tyre, otherwise they're far too squishy imo
Will Injora 1.0 tyres fit on these rims? I'd like to fit them on my FCX24 UNIMOG
do these fit with Injora front rear aluminum portal axel housing for Ascent 18?
Currently I am running a TRX4m with Injora 1.0 brass rims and tires and the chassis and wheels are sitting at 635 grams. I want to upgrade to the 1.3 Injora Brass rims and Cling On tires. What inserts will work best for my cars weight, the green or the yellow,
Will the Cling On 1.3 tires work with the Brass 1.3 rims?
With the Cling On 1.3 tire and 1.3 Brass rims, which is the best rubber insert, the green or the yellow? Will be using it with my TRX4m chassis.
Are these compatible with Axial SCX24?
do these fit the fcx18 lc80 with the 6mm brass hex?
Do you need a new servo for the trx 4m of you use these wheels and the cling-ons?