INJORA +4mm Diamond Axles for 1/18 TRX4M
INJORA +4mm Diamond Axles with Lay Down Servo Mount & Links for 1/18 TRX4M
Note:
- Chassis: Compatible with INJORA TRX4M universal chassis. Not compatible with TRX4M stock chassis as the lay lown servo mount is wider than stock.
- Servo: Compatible with INJORA INJS2065, INJS11, INJS15 and TRX4M stock servos.
- Compatible with both INJORA and stock TRX4M upgrade parts: Axle gears, C hubs, steering knuckles, chassis links, drive shafts.
- Not compatible with original TRX4M size dogbone shafts as the axle housings are 4mm extended per side.
Features:
- Diamond shaped pumpkin for more realistic scale look.
- Equipped with a servo-on-axle lay down servo mount that lowers the center of gravity.
- 2 short drag links optional
- Pre-assembled complete axles. Please grease the axles before installation.
- +4mm axles increase the width of each side by 4mm, increase total length by 8 mm.
- The entire axles have been extended, not just the dogbone shafts, which prevents the dogbone shafts from being overburdened.
- 4mm extended desgin provides better stability and climbing performance
- Come with Hardened CVD shafts, steel 12/24T gears, 5mm(+1mm) brass wheel hexes and nuts.
Specifications:
- Housing Material: Aluminum
- Gear Material: 20CrMo Alloy Steel
- CVD Shaft Material: Hardened Steel
- Gear Ratio: 24/12=2:1 (Same as Stock)
- Total Length: 122mm (4.80in)
- Front Axle Weight: 62g (2.19oz)
- Rear Axle Weight: 42g (1.48oz)
AGE & RECOMMENDATION: Not for children under 14 years. This is not a toy.
Prop 65: ⚠️ California Residents Prop 65 WARNINGS: www.p65warnings.ca.gov
Returns & Refunds: Return options may vary by region. Please see our Return & Refund Policy for details.
The product is beautifully made and processed, it looks like the real thing. Overall I am satisfied, but the project is halfway through assembly at the moment.
As everybody knows, these are great axles. I was particularly happy with a “hidden feature” I found out during installation of the front axle. Basically, the upper front links can sometimes hit your motor if you have a brushed one. But there is a trick. Rather than fitting the ends of those links inside your servo mount (securing them with the longest screw only), you can fit them outside (securing them with a short and a medium screw, there is a combination of two screws that works perfectly). This is not just a hack, as the servo mount is rounded in the exact places that are needed to accommodate the ends of the upper links from the outside, so it looks like it was intentional. Very cool, it saved my build.
Great axles i have 2 sets of them love them just order a portal version as well for another one of my rigs to make a 'mullet' build
I've got a couple of sets of these axles, I love them.
Probably the nicest looking axles available for the Trx4m.
Lovely and smooth. A real pleasure to work on.
Tits
Added this review to add photos
Look amazing and work amazing... They come with two shims each axle to shim the gearing if you need to... I love them! Came with a good amount of grease in the gears, all the links, brass hex's and screws for the links etc. the rear axle basically has link risers built into it!
I really like these axles and how smooth they are.
Actually, fit great with the Injora Defender LCG chassis with minimal interference, which was a nice surprise.
Perfect
I have 2 sets of these, kind of. I have a regular set on my Tarantula and 2 fronts for 4 wheel steer on my Rock Buggy. Easy to work on and super smooth and reliable. Dig em
Really like the appearance and quality of this axles. Easy fit with no issues.
Easy to set up, preassembled, and ready to use straight out of the box
Parts look great and worked well.
happy!
They are very easy to install and they are compatible with all trx4m and they are great with rocks and tracks and they are very affordable.
The best axels I bought for the trx4m. Excellent quality
I have these axles and your frame. Is there a way to run the servo vertical instead of laydown? I run the suspension real low and the laydown servo hits the frame and prevents articulation.
No.
Katera aksa je manj občutljiva na praske siva ali črna?
Personally, I recommend you choose black.
My axle shaft broke at what would be the u joint is there any way to buy the shafts?
Please email us.
My axle shaft broke at what would be the u joint is there any way to buy the shafts?
Winnie, I just sent an email
Does the torq mountless servo work with this axle?
Not recommended. Not compatible with stock TRX4M chassis as the lay down servo mount is wider than stock.
does it have bearings
are they compatible with trx4mt
compatible with trx4m bronco?
Do you make brass portal covers for these? If so could you list a part number so I can order some?
Can I use the stock trx4m servo with these axles?
Do you have to add grease to the gears inside?
Do you plan on making brass covers for the diamond axles?
Will there be a “Diamond” portal axle set?
Does this fit the tarantula chassis?
I simply cut some of the front bars off in front of the verticals at the shock mounts and up to the nose, weakens the nose a bit but the hood definitely keeps it sturdy and I’ve rolled it many times with no issues. I’ve also seen people use heat and bend the tubes around the servo interference.
Does this fit the tarantula chassis?