INJORA 53mm Aluminum Threaded Oil Shocks for 1/18 TRX4M (4M-24)

Grate Product!

Easy install fit perfectly with no issues. They look great and perform great once you get your oil level right. Here’s how I did that
1. Open cap with shock full extended
2. Fill shock body with shock oil (20-30wt works I used 30wt)
3. Move the shock up and down to release any large air bubbles (small movements is all that’s necessary)
4. Wait 5 minutes for any micro bubbles
5. Put cap on loosely and slowly collapse the shock and all the excess fluid will come out. (Compress your shock full in this step)
6. Tighten shock cap fully and test. If your shock rebounds away from the body (the big part) to much fluid repeat step 5 and 6. If you extend your shock and it sucks back in, you’re dialed! It will get better just by working your shock. What you’ll get is a smooth shock with no cavitation.

If your shocks have a “scratchy” feel to them, add fluid. What your feeling is air bubbles

Its ok.

Perfektes Produkt 1a+++

They perform behave and have made my rig roll less they have exceeded my thoughts on how they would be 100% recommended

nice up grade

Very good and quality products.

I got a bunch of stuff from them, wheels, shocks, axles, driveshaft, skid plate. Only thing Im having issues with is the spring reset, it keeps the rear of my bronco down, unless I have them maxed adjusted. I even have the higher spring rate springs in.

I love them!!

Well manufactured and easy to maintain. Spring preload is very nice to tune the tension. Nevertheless, attached springs seems to be too weak for rear. But, stock springs stuits and even looks better (they are well black finished).

Work incredibly well

Well-made parts

I like them they are definitely better then the stick ones but I’m have a few issues with the shocks in the front of my rc truck but however they are great

Esthétique impeccable mais la tige de l'amortisseur coince régulièrement et ne remonte plus en détente.
Doit être actionné plusieurs fois pour fonctionner correctement.
Sinon, fait son travail.

Awesome shocks for the trx4m. Make sure you get shock oil because they don't have much in them. I like to put more than what they suggest.

they are a super good replacement for the stock shocks

Missing brass knuckles for shocks.

Look Great

Fast Shipping..
Thx

Perfect!

Amortisseurs de qualité livrés avec un jeu de ressorts supplémentaires. L' Usinage est très précis.

Good quality nice travel

Works really well!

The quality is good but these are hard to bleed successfully and get all 4 the same. Took me a long, long time.

They are of good quality, but I do not know if they work better than the original ones?

Great product, well made