INJORA C60 Axles with Double Joint Shafts for 1/10 Axial UTB10 Capra 1.9
INJORA C60 Axles with Double Joint Shafts for 1/10 Axial UTB10 Capra 1.9 INJORA LCG Chassis
Note:
- Compatible with 1/10 Axial Capra and INJORA LCG chassis
- If installing stock Axial Capra wheels, remove the front brass steering knuckle weights to prevent interference with the wheel’s inner screws.
Features:
- Hardened alloy steel double-joint axle shafts deliver a 47° steering angle
- Low-mounted Behind-the-Axle (BTA) servo mount
- Scale-inspired double-ended hydraulic steering ram and diff covers
- Removable brass steering knuckle weights allow easy front-end weight tuning
- Front and rear 8/30T alloy steel helical gears for smooth, durable performance
- Includes two steering link sets for both axle-mounted servo (AMS) and chassis-mounted servo (CMS) configurations
Specifications:
- Part Number: C60
- Housing Material: Aluminum
- Steering Knuckles Material: Aluminum
- Steering Knuckle Weights Material: Brass
- Gears & Shafts Material: Alloy Steel
- Shaft Type: Double Joint
- Gear Ratio: 8/30T (Front), 8/30T (Rear)
- Maximum Steering Angle: Approx. 47°
- Overall Length: 237mm
- Front Axle Weight: 354g
- Rear Axle Weight: 161g
Package List:
- 1 × Front Axle
- 1 × Rear Axle
- 1 × BTA Servo Mount
- 1 × Servo Horn
- 1 × AMS Steering link
- 2 × CMS Steering links
- 4 × Brass Wheel Hexes
- 4 × Wheel Nuts
AGE & RECOMMENDATION: Not for children under 14 years. This is not a toy.
Prop 65: ⚠️ California Residents Prop 65 WARNINGS: www.p65warnings.ca.gov
Returns & Refunds: Return options may vary by region. Please see our Return & Refund Policy for details.
Awesomesauce!! These are a masterpiece of work! INJORA!! You killed it with both new sets of axles! The quality of the machining and finish is superb! Definitely will recommend and use for future builds I bought one set of each saving for more!
The steering ram bent on the first outing great looking axle but still bent
For the price, these axles aren't bad at all for the DESIGN. They actually feel and look great. With that said, I think there it falls off a lot is the actual mechanical side of it. If you open up the axle, there is actually quite A LOT of play in the diff. You need to get shims for it out of the box as there is just waay too much excessive play in the diff. Secondly, the screws on the axles all strip VERY easily. Even with Mip tools, the bolt strip extremely easily so I don't recommend using blue loctite on literally anything on this axle unless you've swapped out the bolts to better quality ones. Once I've addressed all these issues, the axle worked great.
The axles have that premium feel for a more modest price. I'm enjoying the entire build out of a mostly Injora built rig.
The axles are great absolute quality i got my rig up to 23mph no problem until I snapped a front axle shaft and apparently they don't sell replacement.... hopefully they will in the future but until then my rig is now rear wheel drive im not buy a entire new axle...
Fantastic quality got them up to 17 mph with a small underpowered battery
Very nice quality axles! well made, and so far no issues with them.
Ohhh man I been waiting on these!! Great job injora
Can it fit to TRX4 LCG carbon chassis?
Compatible with INJORA LCG chassis.