INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade Servo with mount and horn
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade Servo Only
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade Servo Mount Only
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade
INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade Servo Horn Only

INJORA 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 TRX4M Upgrade

SKU: INJS2065-4MBK
Availability: In Stock Pre order Out of stock
$29.99 USD

Option: Servo with mount and horn

Servo with mount and horn
Servo Only
Servo Mount Only
Servo Horn Only
Add to Wishlist
Product Detail

INJORA INJS2065 7KG High Voltage Waterproof 2065 Digital Servo with Mount for 1/18 RC Crawler TRX4M Upgrade

Note: Please use our servo and servo mount together. If you use the stock plastic TRX4M servo mount, you will need to trim the servo mount.

Compatible with:

  • 1/18 TRX4M Defender, Bronco, High Trail K10, F150

Features:

  • IP66 waterproof ratings, you can run it in the rain or underwater!
  • High voltage and digital 2065 servo
  • Stainless steel gears and lower noise

Specifications:

  • Item Name: INJS2065 Servo
  • Dead band: 2μs
  • Neutral Position: 1500μs/330hz
  • Motor: Core Motor
  • Remote Control Angle: 90-120°±2°
  • 500-2500μs Angle: 180°±2°
  • Voltage Range: 4.8V-8.4V
  • Operating Speed(6.0V): 0.09''/60°
  • Operating Speed(8.4V): 0.06''/60°
  • Stall Torque(6.0V): 6.0 kg.cm/83.3oz.in
  • Stall Torque(8.4V): 7.0 kg.cm/97.2oz.in
  • Dimensions: 23*13*25.8mm
  • Weight: 20g
  • Connector Wire Length: JR 300 mm
  • Bearing: 1BB
  • Packing Weight: 28g
  • Package size: 36X23X38mm
  • Spline: Φ5.9 25T

Required tools:

  • 1* 1.5mm hex screwdriver
  • 1* 2.0mm hex screwdriver

AGE & RECOMMENDATION: Not for children under 14 years. This is not a toy.
Prop 65: ⚠️ California Residents Prop 65 WARNINGS: www.p65warnings.ca.gov
Returns & Refunds: Return options may vary by region. Please see our Return & Refund Policy for details.

  • 5 stars: 37 (71%)
  • 4 stars: 11 (21%)
  • 3 stars: 3 (6%)
  • 2 stars: 1 (2%)
  • 1 star: 0 (0%)
A
Alex L.
7kg. Servo with mount

I can say I give this product a 10/10 for craftsmanship and quality. Both the mount and horn are amazing. The problem lies with the servo. I do have 1.3-weighted brass Injora rims and 70 mm tires. The 7 kg servo struggles really badly. I am not sure if it is a bad servo or if it just needs more power. I assumed this would have more power than the stock plastic-gear Traxxas servo. I will upgrade to the 11 kg servo and see if that is better.

J
Jason Klimberg
Died after one week 🥲

Hi my 7kg servo died after one week on my full Injora build.

I was crawling in my bed and then the servo stopped working so I touched it and it was a bit hot so I turned of my build and let it could of for 5 min and then still nothing after turning it on.
I asked for a refund I sent some videos proof that it wasn’t working anymore.

So I would recommend it if you’re Trx4m is stock otherwise go for 11kg but it kinda sucks that it’s not waterproof even though I don’t like to go in the water

C
Cameron Lockwood
It looks and works amazing!

My only issue is it is hard to fit with the stock servo mount.

R
Rupert Cundric
Injora 7 kg high voltage servo

Quiet and fast, good servo

M
Matt G.
Working Good So Far!

After I sneezed on my stock servo and the gears broke (haha), I got this 7kg servo from Injora. More speed and power and the metal gears are holding up! The metallic blue finish is really good lookin', too! Does well under loads.

B
Bryan
It fits and it works sorta

I'm running stock tires and rims with brass steering knuckles and arm. Along with the aluminum servo mount and servo horn. The 7kg servo will not recenter itself after a short time and gets very hot after about 20 minutes to the point where touching it hurts. The connector also doesn't have the small tab that indexes the connector to the ECM, so it can go in backwards.

R
Roger

excelente servo, buena fuerza y respuesta.

d
david Bosch

Envío rápido y conjunto de buena calidad y facil de minatr

k
kendel flory

Put it on my water truck aka my blue bronco and absolutely worked great it flips the whole car around if you hold it by the one wheel

Z
Zdenek CZ

Best quality

L
Loic

Very nice build quality and great torque

M
Mark Hunt
Servo

Quality product

1
10th scale garage
injora servo

verry good and did not brake like the stock ones that come with the car

S
Steven Spencer

Great little servo

P
PASCAL Mouton-Benoit

Perfect

F
FRANCISCO DE VEGA
Buena calidad

Potente y rapido el servo

J
JUSTIN CROSSLAND
Great products

Looks good and performs great

A
August
It's great, but...

I love it. It's metal, so it can't break very easily (like the stock one did after 2 weeks of moderate use). There's one big downside though, and it's that when turning left, it only turns to about 30 degrees, as opposed to the 45 degrees on the other side. And also I have to put the steering trim all the way to the left for it to run straight, like there's literally zero more trim left.

E
Elias
Its OK

I’ve had this servo three times now, and for the third time it suddenly stopped working. When it works, it’s great, but then it just fails out of nowhere.

C
Charles Gibson
Nice upgrade

Definitely worth it. Installed easy and works smooth.

B
B M

It’s a weak servo not much better than stock except it has metal internals.

J
Joachim Schlatter

Alles Bestens

G
Gheorghe Florea

Very good and quality products.

M
Maddox Xiong
Worked for a while but died

This servo might die on you like mine but I don’t know why, it’s super powerful but, I guess it just died, I it also started twitching badly sometimes.

M
Milan van leeuwen
Great

I have it for 2 months now and its amazing if ur on a budget like me!

R
Raymond Gumabon

Servo works fantastic on my LC80 1/18

N
Nick Altman

Kit worked perfectly, hopefully it lasts longer than the oem traxxas servo.

D
Daananas
FANTASTIC

I love it and it has a lot more power than stock.